PHP – VeriTeknik https://www.veriteknik.net.tr/en/ VeriTeknik Bilişim | VeriTeknik Bilişim Sat, 03 Jul 2021 16:20:36 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 PHP 7 on CentOS 7 with PHP-FPM https://www.veriteknik.net.tr/en/php-7-on-centos-7-with-php-fpm-2/ https://www.veriteknik.net.tr/en/php-7-on-centos-7-with-php-fpm-2/#respond Sun, 07 Jun 2020 20:46:37 +0000 http://www.plugged.in/?p=1053 Most of the yum repositories don’t include PHP7.0.X on current releases for the time being. So if you need PHP7.0.X, you need to compile and build it for your self. I decided to put all required packages to the compilation, so most probably you wouldn’t need additional packages, just a quick tip, if you need […]

The post PHP 7 on CentOS 7 with PHP-FPM appeared first on VeriTeknik.

]]> Most of the yum repositories don’t include PHP7.0.X on current releases for the time being. So if you need PHP7.0.X, you need to compile and build it for your self. I decided to put all required packages to the compilation, so most probably you wouldn’t need additional packages, just a quick tip, if you need additional packages you can install via pecl or pear tools.

Which PHP configure options should I use before compiling?

If you ever need to get the list of modules installed in your current PHP, type the following command via console:

php -m

So, take a list of your current configuration and check the configure list below in order to have a compatible compilation to your existing older version of PHP.

Advice: First of all, you should consider removing PHP packages from your server before compiling PHP, but be aware your codes will be visible till you install the compiled version to your server, consider shutting down your apache server for a while.

yum erase php*

Before downloading the code, install “Development Tools” by typing:

yum groupinstall "Development Tools"

and install other related header files:

yum install wget httpd-devel libtool-ltdl-devel libxml2-devel \
bzip2-devel net-snmp-devel openssl-devel pcre-devel \
curl-devel gd-devel mysql-devel libxslt-devel \
postgresql-devel gmp-devel systemd-devel

Download & install libmcrypt

cd /usr/src
wget http://downloads.sourceforge.net/project\
/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz
tar zxvf libmcrypt-2.5.8.tar.gz 
cd libmcrypt-2.5.8
./configure -libdir=/usr/lib64
make
make install

 

Download & extract PHP 7.0.4 release:

wget http://php.net/get/php-7.0.4.tar.gz/from/this/mirror
mv mirror /usr/src/php-7.0.4.tar.gz
cd /usr/src/
tar zxvf /usr/src/php-7.0.4.tar.gz 
cd php-7.0.4
./configure \
 --with-apxs2 \
 --with-curl=/usr/local/lib \
 --with-config-file-path=/etc \
 --with-config-file-scan-dir=/etc/php.d \
 --with-pic \
 --with-gd \
 --with-gettext \
 --with-jpeg-dir=/usr/local/lib \
 --with-freetype-dir=/usr/local/lib \
 --enable-sockets \
 --with-kerberos \
 --with-openssl \
 --with-mhash \
 --with-mcrypt=/usr/local/lib \
 --with-mysqli=/usr/bin/mysql_config \
 --with-pdo-mysql=/usr \
 --with-pdo-pgsql=/usr \
 --with-pcre-regex=/usr \
 --with-pear \
 --with-gmp \
 --with-pgsql \
 --with-png-dir=/usr/local/lib \
 --with-xsl \
 --with-zlib \
 --with-zlib-dir=/usr/local/lib \
 --with-iconv \
 --with-libxml-dir=/usr \
 --enable-bcmath \
 --enable-calendar \
 --enable-exif \
 --enable-ftp \
 --enable-gd-native-ttf \
 --enable-soap \
 --enable-sockets \
 --enable-mbstring \
 --enable-zip \
 --enable-wddx \
 --enable-shmop \
 --with-libdir=lib64 \
 --disable-debug \
 --with-bz2 \
 --enable-gd-native-ttf \
 --enable-xml \
 --with-snmp=/usr \
 --enable-json \
 --with-fpm-user=apache\
 --with-fpm-group=apache\
 --enable-fpm \
 --with-fpm-systemd

Make & Install by typing:

make
make install
cp php.ini-production /etc/php.ini

Run the following to enable systemd service for PHP:

cat <<< '
[Unit]
Description=The PHP FastCGI Process Manager - VeriTeknik
After=syslog.target network.target

[Service]
Type=notify
PIDFile=/var/run/php-fpm.pid
ExecStart=/usr/local/sbin/php-fpm --nodaemonize \
--fpm-config /etc/php-fpm.conf
ExecReload=/bin/kill -USR2 $MAINPID

[Install]
WantedBy=multi-user.target
' > /usr/lib/systemd/system/php-fpm.service
systemctl enable php-fpm

Get rid of obsolete settings:

sed -i 's#;date.timezone =.*#  date.timezone = "Europe/Istanbul"#' /etc/php.ini
sed -i 's#upload_max_filesize =.*#upload_max_filesize = 200M#' /etc/php.ini
sed -i 's#post_max_size =.*#post_max_size = 200M#' /etc/php.ini
cat <<< ' include=/etc/php-fpm.d/*.conf [global] pid = \ 
/run/php-fpm/php-fpm.pid error_log = /var/log/php-fpm/error.log \
daemonize = no ' > /etc/php-fpm.conf
mkdir /etc/php-fpm.d

 

You need to create the appropriate user account the fpm process will run on, as a sample, we use plugged as a user:

useradd plugged
chmod 755 /home/plugged

create the php-fpm process config for the specific site:

cat <<< '
[www]
listen = 127.0.0.1:9001
 
listen.allowed_clients = 127.0.0.1
listen.owner = plugged
listen.group = plugged
user = plugged
group = plugged
pm = dynamic
pm.max_children = 50
pm.start_servers = 5
pm.min_spare_servers = 5
pm.max_spare_servers = 35

slowlog = /var/log/php-fpm/www-slow.log
 
catch_workers_output = yes
 
php_admin_value[error_log] = /home/plugged/logs/mphp_error.log
php_admin_flag[log_errors] = on
php_value[session.save_handler] = files
php_value[session.save_path] = /home/plugged/session
' > /etc/php-fpm.d/plugged.conf

mkdir /run/php-fpm/
mkdir /var/log/php-fpm/
touch /var/log/php-fpm/error.log
mkdir {/home/plugged/logs/,/home/plugged/session}
chown -R plugged:plugged /home/plugged
systemctl start php-fpm
sed -i 's/DirectoryIndex index.html.*/  DirectoryIndex index.html index.html.var index.php/' /etc/httpd/conf/httpd.conf

please let us know if you find any mistake

The post PHP 7 on CentOS 7 with PHP-FPM appeared first on VeriTeknik.

]]> https://www.veriteknik.net.tr/en/php-7-on-centos-7-with-php-fpm-2/feed/ 0 1053 PHP 7 on CentOS 7 with PHP-FPM https://www.veriteknik.net.tr/en/php-7-on-centos-7-with-php-fpm/ https://www.veriteknik.net.tr/en/php-7-on-centos-7-with-php-fpm/#respond Wed, 18 Sep 2019 20:57:42 +0000 http://www.plugged.in/?p=1076 Most of the yum repos doesn’t include PHP7.0.X on current releases for the time being. So if you need PHP7.0.X, you need to compile and build it for your self or you need to add additional repos to yum, which will be much more easier and much more flexible to update later. So, on a […]

The post PHP 7 on CentOS 7 with PHP-FPM appeared first on VeriTeknik.

]]> Most of the yum repos doesn’t include PHP7.0.X on current releases for the time being. So if you need PHP7.0.X, you need to compile and build it for your self or you need to add additional repos to yum, which will be much more easier and much more flexible to update later. So, on a clean installed server proceed with the installation of Epel and Remi repos, in case you don’t have wget, also install it:

yum install epel-release
yum install net-tools, bind-utils # optional life savers 
rpm -Uvh http://mirror.veriteknik.net.tr/remi/enterprise/remi-release-7.rpm
yum install php70-php-fpm php70-php-cli php70-php-gd php70-php-json \
php70-php-mbstring php70-php-mcrypt php70-php-mysqlnd php70-php-xml
yum install nginx

 
Please note that if you need additional PHP packages, you can search them with the following command:

yum list php70-*
#Available Packages
#php70-php-opcache.x86_64
#.
#.
#php70-php-pecl-crypto.x86_64
#php70-php-pecl-geoip.x86_64 
#php70-php-pecl-imagick.x86_64
#php70-php-pecl-memcache.x86_64
#php70-php-pecl-xdebug.x86_64
#php70-php-pgsql.x86_64
#php70-php-soap.x86_64
#php70-php-xmlrpc.x86_64
#..
# and to install a package you desire, type the name:
yum install php70-php-pgsql

Run the following to enable systemd service for PHP-FPM:

systemctl enable php70-php-fpm
systemctl enable nginx

Disable SELINUX, set to disabled:

vi /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protected.
# mls - Multi Level Security protection.
SELINUXTYPE=targeted

type SHIFT+ZZ to save and exit, and for the time beign type setenforce 0 to disable SELINUX temproray.
Next step is to get rid of obsolete settings:

sed -i 's#;date.timezone =.*#  date.timezone = \ 
"Europe/Istanbul"#' /etc/opt/remi/php70/php.ini
sed -i 's#upload_max_filesize =.*#upload_max_filesize = \
200M#' /etc/opt/remi/php70/php.ini
sed -i 's#post_max_size =.*#post_max_size = \
200M#' /etc/opt/remi/php70/php.ini

You need to create the appropriate user account the fpm process will run on, as a sample we use plugged as a user:

useradd plugged
chmod 755 /home/plugged
mkdir /home/plugged/{logs,public_html,session}
touch /home/plugged/logs/{mphp_error.log,php-fpm-slow.log}
chown -R vtt:vtt /home/plugged/public_html/

create the php-fpm process config for the specific site:

cat <<< '[plugged] 
listen = 127.0.0.1:9001
listen.allowed_clients = 127.0.0.1 
listen.owner = plugged 
listen.group = plugged 
user = plugged 
group = plugged 
pm = dynamic 
pm.max_children = 50 
pm.start_servers = 5 
pm.min_spare_servers = 5 
pm.max_spare_servers = 35 
slowlog = /home/plugged/logs/php-fpm-slow.log 
catch_workers_output = yes 
php_admin_value[error_log] = /home/plugged/logs/mphp_error.log 
php_admin_flag[log_errors] = on 
php_value[session.save_handler] = files 
php_value[session.save_path] = /home/plugged/session ' \
> /etc/opt/remi/php70/php-fpm.d/plugged.conf

Turn on PHP-FPM by typing:

systemctl start php70-php-fpm.service

If it fails to start, you can check the logs by typing
systemctl status php70-php-fpm.service

Also please check the service is running by typing netstat so if the port is open, you should see that:

netstat -tulpn | grep php-fpm
#tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      908/php-fpm: master 
#tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      908/php-fpm: master

please let us know if you find any mistake

The post PHP 7 on CentOS 7 with PHP-FPM appeared first on VeriTeknik.

]]> https://www.veriteknik.net.tr/en/php-7-on-centos-7-with-php-fpm/feed/ 0 1076 PHP 5.4.44 on CentOS 6.7 https://www.veriteknik.net.tr/en/php-5-4-44-on-centos-6-7/ https://www.veriteknik.net.tr/en/php-5-4-44-on-centos-6-7/#respond Mon, 31 Aug 2015 23:53:03 +0000 http://www.plugged.in/?p=1011 Most of the yum repos doesn’t include PHP5.4.X on current releases for the time being. So if you need PHP5.4.X, you need to compile and build it for your self. I decided to put all required packages to the compilation, so most probably you wouldn’t need additional packages, just a quick tip, if you need […]

The post PHP 5.4.44 on CentOS 6.7 appeared first on VeriTeknik.

]]> Most of the yum repos doesn’t include PHP5.4.X on current releases for the time being. So if you need PHP5.4.X, you need to compile and build it for your self. I decided to put all required packages to the compilation, so most probably you wouldn’t need additional packages, just a quick tip, if you need additional packages you can install via pecl or pear tools.

Which PHP configure options should I use before compiling?

If you ever need to get the list of modules installed in your current PHP, type the following command via console:

php -m

So, take a list of your current configuration and check the configure list below in order to have a compatible compilation to your existing older version of PHP.

Advise: First of all, you should consider removing php packages from your server before compiling php, but beaware your codes will be visible till you install the compiled version to your server, consider shutting down your apache server for a while.

yum erase php*

Before downloading the code, install “Development Tools” by tiping:

yum groupinstall "Development Tools"

and install other related header files:

yum install httpd-devel libtool-ltdl-devel libxml2-devel bzip2-devel net-snmp-devel openssl-devel pcre-devel curl-devel gd-devel mysql-devel libxslt-devel postgresql-devel gmp-devel

Download & install libmcrypt

cd /usr/src
wget http://downloads.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz
   tar zxvf libmcrypt-2.5.8.tar.gz 
   cd libmcrypt-2.5.8
   ./configure -libdir=/usr/lib64
   make
   make install

 

Download & extract php 5.4.44 release:

wget http://php.net/get/php-5.4.44.tar.gz/from/this/mirror
mv mirror php-5.4.44.tar.gz
tar zxvf php-5.4.44.tar.gz
./configure \
 --with-apxs2 \
 --with-curl=/usr/local/lib \
 --with-config-file-path=/etc \
 --with-config-file-scan-dir=/etc/php.d \
 --with-pic \
 --with-gd \
 --with-gettext \
 --with-jpeg-dir=/usr/local/lib \
 --with-freetype-dir=/usr/local/lib \
 --enable-sockets \
 --with-kerberos \
 --with-openssl \
 --with-mhash \
 --with-mcrypt=/usr/local/lib \
 --with-mysql=/usr \
 --with-mysqli=/usr/bin/mysql_config \
 --with-pdo-mysql=/usr \
 --with-pdo-pgsql=/usr \
 --with-pcre-regex=/usr \
 --with-pear \
 --with-gmp \
 --with-pgsql \
 --with-png-dir=/usr/local/lib \
 --with-xsl \
 --with-zlib \
 --with-zlib-dir=/usr/local/lib \
 --with-iconv \
 --with-libxml-dir=/usr \
 --enable-bcmath \
 --enable-calendar \
 --enable-exif \
 --enable-ftp \
 --enable-gd-native-ttf \
 --enable-soap \
 --enable-sockets \
 --enable-mbstring \
 --enable-zip \
 --enable-wddx \
 --enable-shmop \
 --with-libdir=lib64 \
 --disable-debug \
 --with-bz2 \
 --enable-gd-native-ttf \
 --enable-xml \
 --with-snmp=/usr \
 --enable-json

Make & Install by typing:

make
make install
cp php.ini-production /etc/php.ini

Get rid of obsolete settings:

sed -i 's#;date.timezone =.*#  date.timezone = "Europe/Istanbul"#' /etc/php.ini
sed -i 's#upload_max_filesize =.*#upload_max_filesize = 200M#' /etc/php.ini
sed -i 's#post_max_size =.*#post_max_size = 200M#' /etc/php.ini

Don’t forget to add respective extension to httpd.conf:

echo "AddType application/x-httpd-php .php" >> /etc/httpd/conf.d/php.conf
echo "AddType application/x-httpd-php-source .phps" >> /etc/httpd/conf.d/php.conf

and a final configuration:

sed -i 's/DirectoryIndex index.html.*/  DirectoryIndex index.html index.html.var index.php/' /etc/httpd/conf/httpd.conf

please let us know if you find any mistake

The post PHP 5.4.44 on CentOS 6.7 appeared first on VeriTeknik.

]]> https://www.veriteknik.net.tr/en/php-5-4-44-on-centos-6-7/feed/ 0 1011 PHP5.6.3 on CentOS 6.6 with MSSQL Support https://www.veriteknik.net.tr/en/build-php5-6-on-centos-6-6-with-mssql-support/ https://www.veriteknik.net.tr/en/build-php5-6-on-centos-6-6-with-mssql-support/#respond Wed, 03 Dec 2014 22:49:22 +0000 http://www.plugged.in/?p=972 Most of the yum repos doesn’t include PHP5.6.X on current releases for the time being. So if you need PHP5.6.X, you need to compile and build it for your self. Advise: First of all, you should consider removing php packages from your server before compiling php, but beaware your codes will be visible till you […]

The post PHP5.6.3 on CentOS 6.6 with MSSQL Support appeared first on VeriTeknik.

]]> Most of the yum repos doesn’t include PHP5.6.X on current releases for the time being. So if you need PHP5.6.X, you need to compile and build it for your self.

Advise: First of all, you should consider removing php packages from your server before compiling php, but beaware your codes will be visible till you install the compiled version to your server, consider shutting down your apache server for a while.

yum erase php*

Before downloading the code, install “Development Tools” by tiping:

yum groupinstall "Development Tools"

and install other related header files:

yum install httpd-devel libtool-ltdl-devel libxml2-devel openssl-devel pcre-devel curl-devel gd-devel mysql-devel libxslt-devel

Download & install libmcrypt

wget http://downloads.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz
   10  tar zxvf libmcrypt-2.5.8.tar.gz 
   11  cd libmcrypt-2.5.8
   12  ./configure 
   13  make
   14  make install

Download FreeTDS source, don’t use yum to install freetds-devel!

wget ftp://ftp.freetds.org/pub/freetds/current/freetds-current.tar.gz
tar zxvf freetds-stable.tgz
cd freetds-0.91/ #in my case
./configure --prefix=/usr/local/freetds --enable-msdblib
make
make install
cp include/tds.h /usr/local/freetds/include
cp src/tds/.libs/libtds.a /usr/local/freetds/lib
echo "/usr/local/freetds/lib" >> /etc/ld.so.conf
echo "export FREETDSCONF=/usr/local/freetds/etc/freetds.conf" >> /etc/profile
ln -s /usr/local/freetds/lib /usr/local/freetds/lib64

Download & extract php 5.6.3 release:

wget http://php.net/get/php-5.6.3.tar.gz/from/this/mirror
mv mirror php-5.6.3.tar.gz
tar zxvf php-5.6.3.tar.gz
cd php-5.6.3
./configure \
        --with-apxs2 \
        --with-curl=/usr/local/lib \
        --with-gd \
        --with-gettext \
        --with-jpeg-dir=/usr/local/lib \
        --with-freetype-dir=/usr/local/lib \
        --with-kerberos \
        --with-openssl \
        --with-mhash \
        --with-mcrypt \
        --with-mysql=/usr \
        --with-mysqli=/usr/bin/mysql_config \
        --with-pdo-mysql=/usr \
        --with-pcre-regex=/usr \
        --with-pear \
        --with-png-dir=/usr/local/lib \
        --with-xsl \
        --with-zlib \
        --with-zlib-dir=/usr/local/lib \
        --with-iconv \
        --enable-bcmath \
        --enable-calendar \
        --enable-exif \
        --enable-ftp \
        --enable-gd-native-ttf \
        --enable-soap \
        --enable-sockets \
        --enable-mbstring \
        --enable-zip \
        --enable-wddx \
        --with-libdir=lib64 \
        --with-mssql=/usr/local/freetds

Make & Install by typing:

make
make install
cp php.ini-production /etc/php.ini
sed -i 's/;date.timezone =.*/  date.timezone = "Europe/Istanbul"/' /etc/php.ini

Don’t forget to add respective extension to httpd.conf:

echo "AddType application/x-httpd-php .php" >> /etc/httpd/conf.d/php.conf
echo "AddType application/x-httpd-php-source .phps" >> /etc/httpd/conf.d/php.conf

and a final configuration:

sed -i 's/DirectoryIndex index.html.*/  DirectoryIndex index.html index.html.var index.php/' /etc/httpd/conf/httpd.conf

please let us know if you find any mistake

The post PHP5.6.3 on CentOS 6.6 with MSSQL Support appeared first on VeriTeknik.

]]> https://www.veriteknik.net.tr/en/build-php5-6-on-centos-6-6-with-mssql-support/feed/ 0 972 Compile and build Apache + MySQL + PHP from the source https://www.veriteknik.net.tr/en/compiling-apache-mysql-php-source/ https://www.veriteknik.net.tr/en/compiling-apache-mysql-php-source/#respond Thu, 31 Oct 2013 19:56:47 +0000 http://www.plugged.in/?p=896 This is a complete working solution to build Apache (httpd-2.2.25), MySQL (MySQL-5.6.14) and PHP (PHP-5.5.5) from the sources. Article tested many times on CentOS 6.4 and you can directly copy & paste the commands below to build the lastest releases. We advise you to use a freshly installed OS as compiling may corrupt or delete […]

The post Compile and build Apache + MySQL + PHP from the source appeared first on VeriTeknik.

]]> This is a complete working solution to build Apache (httpd-2.2.25), MySQL (MySQL-5.6.14) and PHP (PHP-5.5.5) from the sources. Article tested many times on CentOS 6.4 and you can directly copy & paste the commands below to build the lastest releases. We advise you to use a freshly installed OS as compiling may corrupt or delete your existing structure or data. The solution both tested on a clean dedicated server and a KVM virtualized VPS.

Before you begin your compilation you should need additional header files and libraries required, please use the following code to install pre-requisities, don’t delete them as you would definitely need them when you upgrade to new releases also:

yum install make gcc automake zlib-devel bison cmake libtool wget gcc-c++ unzip ncurses-devel openssl-devel pcre-devel libxml2-devel curl-devel gd-devel libxslt-devel

Building & Installing Apache prefork

download the latest release of Apache Web Server and unpack:

wget http://ftp.itu.edu.tr/Mirror/Apache//httpd/httpd-2.2.25.tar.gz
tar zxvf httpd-2.2.25.tar.gz 
cd httpd-2.2.25

We advise you to configure with the options below as this form is widely used:

./configure \
        "--prefix=/etc/httpd" \
        "--exec-prefix=/etc/httpd" \
        "--bindir=/usr/bin" \
        "--sbindir=/usr/sbin" \
        "--sysconfdir=/etc/httpd/conf" \
        "--enable-so" \
        "--enable-dav" \
        "--enable-dav-fs" \
        "--enable-dav-lock" \
        "--enable-suexec" \
        "--enable-deflate" \
        "--enable-unique-id" \
        "--enable-mods-static=most" \
        "--enable-reqtimeout" \
        "--with-mpm=prefork" \
        "--with-suexec-caller=apache" \
        "--with-suexec-docroot=/" \
        "--with-suexec-gidmin=100" \
        "--with-suexec-logfile=/var/log/httpd/suexec_log" \
        "--with-suexec-uidmin=100" \
        "--with-suexec-userdir=public_html" \
        "--with-suexec-bin=/usr/sbin/suexec" \
        "--with-included-apr" \
        "--with-pcre=/usr" \
        "--includedir=/usr/include/apache" \
        "--libexecdir=/usr/lib/apache" \
        "--datadir=/var/www" \
        "--localstatedir=/var" \
        "--enable-logio" \
        "--enable-ssl" \
        "--enable-rewrite" \
        "--enable-proxy" \
        "--enable-expires" \
        "--with-ssl=/usr" \
        "--enable-headers"

to build and install source distro, type:

make
make install

Build & Install MySQL

Since we need headers and libraries of mysql for compiling PHP, we will first install MySQL server before PHP compilation.

wget http://dev.mysql.com/get/Downloads/MySQL-5.6/mysql-5.6.14.tar.gz/from/http://cdn.mysql.com/
tar zxvf mysql-5.6.14.tar.gz 
cd mysql-5.6.14
groupadd mysql
useradd -g mysql mysql
cmake .  -DMYSQL_UNIX_ADDR=/var/lib/mysql/mysql.sock
make
make install

If you encounter problems while running cmake, you have to delete CmakeCache.txt before re-compiling with cmake

#log in to newly created mysql dir
cd /usr/local/mysql/
#change owner and group
chown -R mysql:mysql .
scripts/mysql_install_db --user=mysql --datadir=/var/lib/mysql
#add service command
cp support-files/mysql.server /etc/init.d/mysqld
chkconfig --add mysqld
chkconfig mysqld on
#start mysql server
service mysqld start

change your mysql password by typing:

./bin/mysqladmin -u root password 'new-password' 
./bin/mysqladmin -u root -h change.this.hostname password 'new-password'

Build libmcrypt from the source

libmcypt repo is not included in the main yum repo, so better install it from the source:

wget http://sourceforge.net/projects/mcrypt/files/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz/download?use_mirror=garr
tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8
./configure
make
make install

Building PHP-5.5.5 from the source

PHP configuration is also given with the mostly used modules & functionality, download unpack & configure as stated below:

wget http://us2.php.net/get/php-5.5.5.tar.gz/from/this/mirror
tar zxvf php-5.5.5.tar.gz
cd php-5.5.5
./configure \
        --with-apxs2 \
        --with-curl=/usr \
        --with-gd \
        --with-gettext \
        --with-jpeg-dir=/usr \
        --with-freetype-dir=/usr \
        --with-kerberos \
        --with-openssl \
        --with-mcrypt=/usr/local/lib \
        --with-mhash \
        --with-mysql=mysqlnd \
        --with-mysqli=mysqlnd \
        --with-pcre-regex \
        --with-pear \
        --with-png-dir=/usr \
        --with-xsl \
        --with-zlib \
        --with-zlib-dir=/usr \
        --with-iconv \
        --enable-bcmath \
        --enable-calendar \
        --enable-exif \
        --enable-ftp \
        --enable-gd-native-ttf \
        --enable-soap \
        --enable-sockets \
        --enable-mbstring \
        --enable-zip \
        --enable-wddx
make
make install
libtool --finish /root/php-5.5.5/libs
cp php.ini-production /usr/local/lib/php.ini
sed -i 's/;date.timezone =.*/  date.timezone \= "Europe\/Istanbul"/' /usr/local/lib/php.ini

Download phpMyAdmin and install it to webroot:

wget http://downloads.sourceforge.net/project/phpmyadmin/phpMyAdmin/4.0.8/phpMyAdmin-4.0.8-all-languages.tar.gz
tar zxvf phpMyAdmin-4.0.8-all-languages.tar.gz 
mv phpMyAdmin-4.0.8-all-languages /var/www/
mv /var/www/phpMyAdmin-4.0.8-all-languages/ /var/www/phpMyAdmin

create a test page to see if everything went well:

echo "<?PHP phpInfo();?>" > /var/www/index.php

If you cannot see a PHP info page, you need to add httpd directives to your httpd.conf:

echo "AddType application/x-httpd-php .php" >> /etc/httpd/conf/extra/httpd-php.conf
echo "AddType application/x-httpd-php-source .phps" >> /etc/httpd/conf/extra/httpd-php.conf

echo "Include conf/extra/httpd-php.conf" >> /etc/httpd/conf/httpd.conf

restart apache by typing: apachectl restart

The post Compile and build Apache + MySQL + PHP from the source appeared first on VeriTeknik.

]]> https://www.veriteknik.net.tr/en/compiling-apache-mysql-php-source/feed/ 0 896 Build PHP5.5 on CentOS 6.4 with MSSQL Support https://www.veriteknik.net.tr/en/build-php5-5-centos-6-4-mssql-support/ https://www.veriteknik.net.tr/en/build-php5-5-centos-6-4-mssql-support/#respond Fri, 25 Oct 2013 01:24:27 +0000 http://www.plugged.in/?p=883 Most of the yum repos doesn’t include PHP5.5.X on current releases for the time being. So if you need PHP5.5.X, you need to compile and build it for your self. Advise: First of all, you should consider removing php packages from your server before compiling php, but beaware your codes will be visible till you […]

The post Build PHP5.5 on CentOS 6.4 with MSSQL Support appeared first on VeriTeknik.

]]> Most of the yum repos doesn’t include PHP5.5.X on current releases for the time being. So if you need PHP5.5.X, you need to compile and build it for your self.

Advise: First of all, you should consider removing php packages from your server before compiling php, but beaware your codes will be visible till you install the compiled version to your server, consider shutting down your apache server for a while.

yum erase php*

Before downloading the code, install “Development Tools” by tiping:

yum groupinstall "Development Tools"

and install other related header files:

yum install httpd-devel libxml2-devel openssl-devel pcre-devel curl-devel gd-devel mysql-devel libxslt-devel

Download & install libmcrypt

wget http://downloads.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz
   tar zxvf libmcrypt-2.5.8.tar.gz 
   cd libmcrypt-2.5.8
   ./configure 
   make
   make install

Download FreeTDS source, don’t use yum to install freetds-devel!

wget ftp://ftp.astron.com/pub/freetds/stable/freetds-stable.tgz
tar zxvf freetds-stable.tgz
cd freetds-0.91/ #in my case
./configure --prefix=/usr/local/freetds --enable-msdblib
make
make install
cp include/tds.h /usr/local/freetds/include
cp src/tds/.libs/libtds.a /usr/local/freetds/lib
echo "/usr/local/freetds/lib" >> /etc/ld.so.conf
echo "export FREETDSCONF=/usr/local/freetds/etc/freetds.conf" >> /etc/profile
ln -s /usr/local/freetds/lib /usr/local/freetds/lib64

Download & extract php 5.5.5 release:

wget http://us2.php.net/get/php-5.5.5.tar.gz/from/this/mirror
mv mirror php-5.5.5.tar.gz
tar zxvf php-5.5.5.tar.gz
cd php-5.5.5
./configure \
        --with-apxs2 \
        --with-curl=/usr/local/lib \
        --with-gd \
        --with-gettext \
        --with-jpeg-dir=/usr/local/lib \
        --with-freetype-dir=/usr/local/lib \
        --with-kerberos \
        --with-openssl \
        --with-mcrypt \
        --with-mhash \
        --with-mysql=/usr \
        --with-mysqli=/usr/bin/mysql_config \
        --with-pdo-mysql=/usr \
        --with-pcre-regex=/usr \
        --with-pear \
        --with-png-dir=/usr/local/lib \
        --with-xsl \
        --with-zlib \
        --with-zlib-dir=/usr/local/lib \
        --with-iconv \
        --enable-bcmath \
        --enable-calendar \
        --enable-exif \
        --enable-ftp \
        --enable-gd-native-ttf \
        --enable-soap \
        --enable-sockets \
        --enable-mbstring \
        --enable-zip \
        --enable-wddx \
        --with-libdir=lib64 \
        --with-mssql=/usr/local/freetds

Make & Install by typing:

make
make install
cp php.ini-production /etc/php.ini
sed -i 's/;date.timezone =.*/  date.timezone \= "Europe\/Istanbul"/' /etc/php.ini

Don’t forget to add respective extension to httpd.conf:

echo "AddType application/x-httpd-php .php" >> /etc/httpd/conf.d/php.conf
echo "AddType application/x-httpd-php-source .phps" >> /etc/httpd/conf.d/php.conf

and a final configuration:

sed -i 's/DirectoryIndex index.html.*/  DirectoryIndex index.html index.html.var index.php/' /etc/httpd/conf/httpd.conf

please let us know if you find any mistake

The post Build PHP5.5 on CentOS 6.4 with MSSQL Support appeared first on VeriTeknik.

]]> https://www.veriteknik.net.tr/en/build-php5-5-centos-6-4-mssql-support/feed/ 0 883 Simple LDAP Class for PHP https://www.veriteknik.net.tr/en/simple-ldap-class-for-php/ https://www.veriteknik.net.tr/en/simple-ldap-class-for-php/#respond Sun, 25 Nov 2012 00:12:55 +0000 http://www.plugged.in/?p=652 In this post, i’m gonna explain how to connect to a LDAP server via using PHP. First i wanna talk about some definitions; LDAP means Lightweight Directory Access Protocol. As you can understand from it’s name, it is a database which uses directory-tree based structure. It’s used by OpenLDAP, Sun Directory Server, Microsoft Active Directory […]

The post Simple LDAP Class for PHP appeared first on VeriTeknik.

]]> In this post, i’m gonna explain how to connect to a LDAP server via using PHP.

First i wanna talk about some definitions;

LDAP means Lightweight Directory Access Protocol.

As you can understand from it’s name, it is a database which uses directory-tree based structure.

It’s used by OpenLDAP, Sun Directory Server, Microsoft Active Directory and such directory services.

LDIF means LDAP Data Interchange Format.

You can easily execute LDAP queries using ldif files. For example;

dn: cn=John Doe,dc=example,dc=com
cn: John Doe
givenName: John
sn: Doe
telephoneNumber: +1 888 555 6789
telephoneNumber: +1 888 555 1232
mail: john@example.com
Manager: cn=Jane Doe,dc=example,dc=com
objectClass: inetOrgPerson
objectClass: organizationalPerson
objectClass: person
objectClass: top

You can see some other terms(actually attributes) in the LDAP query above. Such as dn: Distinguished Name, cn: Common Name, sn: Surname.

I’ll give more information about LDAP later in another post.

PHP LDAP Functions

PHP has it’s own LDAP functions by it’s own. But i’ve decided to write a class for easier access to these functions.

First, you have to include our class below.

<?php 

class LDAP{

    public  $ldapserver = "99.245.56.89";
    public  $ldapport = "389";
    public  $basedn = "cn=admin,dc=web-sistem,dc=com";
    public  $basepass = "yourldap_password"; 

	function connect($server,$port){

		echo "Connecting to LDAP Server..."; 
		$connection = ldap_connect($server,$port);  // must be a valid LDAP server!	
		ldap_set_option($connection, LDAP_OPT_PROTOCOL_VERSION, 3);

		// PHP Reference says there is no control of connection status in OpenLDAP 2.x.x
		// So we'll use binding function to check connection status.

		return $connection;

	}

	function bind($connection,$basedn,$basepass){

		echo "<br><br>Binding...<br>";  
		$ldaprdn  = $basedn;    // ldap rdn or dn 
		$ldappass = $basepass;  // associated password
		$bind = ldap_bind($connection, $ldaprdn, $ldappass);

		if ($bind) { 
			echo "LDAP bind successful...";

		} else { 
			echo "LDAP bind failed..."; 
		}
	}

	function search($connection, $searchdn, $filter, $attributes = array()){

		$sr = ldap_search($connection, $searchdn, $filter, $attributes);

		if ($sr) {
			echo 'Search Succeeded. Getting Entries...<br>';

	        echo "Number of entires returned:  " . ldap_count_entries($connection, $sr) . "<br />";

	        $info = ldap_get_entries($connection, $sr);

	        echo "Data for " . $info["count"] . " items returned:<p>\n";

			print_r($info);
			echo '<hr><br>';

		} else {
			echo 'Search Failed.<br>';
		}
	}

	function addRecord($connection, $adddn, $record){

	    $addProcess = ldap_add($connection, $adddn, $record);

	    if($addProcess){
	        echo "Entry added<br>";
			echo '<hr><br>';
	    } else {
	    	echo "Please check your data<br>";
			echo '<hr><br>';
	    }
	}

	function modifyRecord($connection, $modifydn, $record){
		$modifyProcess = ldap_modify($connection, $modifydn, $record);
	    if($modifyProcess){
	        echo "Entry modified<br>";
			echo '<hr><br>';
	    } else {
	    	echo "Please check your data<br>";
			echo '<hr><br>';
	    }
	}

	function deleteRecord($connection, $dn, $recursive = false){
	    echo "Deleting Record...<br>";

	    if($recursive == false){
	    	echo 'Entry: ' . $dn . ' deleted.';
	        return(ldap_delete($connection, $dn));
	    } else {

	        // Search for child entries	        
	        $sr = ldap_list($connection, $dn, "ObjectClass=*", array(""));
	        $info = ldap_get_entries($connection, $sr);

	        for($i=0;$i<$info['count'];$i++){
	            // Recursive delete child entries - using myldap_delete to recursive deletion
	            $result = myldap_delete($connection, $info[$i]['dn'], $recursive);
	            if(!$result){
	                // return status code if deletion fails.
	                return($result);
	            }
	        }
			// Delete top dn
			echo 'Entry: ' . $dn . ' deleted.';
	        return(ldap_delete($connection, $dn));
	    }
	}

	function close($connection){
		echo '<hr><br>';
	    echo "Closing connection";
	    ldap_close($connection);
	}

}

?>

And then you may want to initialize and use our class. Usage is so simple.

<?php

	require_once('class.ldap.php');

	$ldap = new LDAP();

	// Connect to LDAP Server  - connect(ldap_server, port)
	$connection = $ldap->connect($ldap->ldapserver,$ldap->ldapport);

	// Bind with LDAP instance
	$ldap->bind($connection,'cn=admin,dc=web-sistem,dc=com','yourldap_password');

	echo '<hr><br>';

	// Search LDAP directory

	// Search with a wildcard
	$ldap->search($connection,'o=hosting,dc=web-sistem,dc=com','vd=*');

	// Search with no attributes specified	
	$ldap->search($connection,'o=hosting,dc=web-sistem,dc=com','vd=plugged.in');

	// Search with attributes (attributes must be an array)

	$ldap->search($connection,'o=hosting,dc=web-sistem,dc=com','vd=web-sistem.com', array('custID'));

	// Prepare data to insert

	// Please change the record entry as required by your company directory structure

	$insert_data['objectclass'][0] = "top";
	$insert_data['objectclass'][1] = "VirtualDomain";

	$insert_data["accountActive"] = "TRUE";
	$insert_data["delete"] = "FALSE";
	$insert_data["lastChange"] = "103";
	$insert_data["vd"] = "plugged.in";
	$insert_data["adminID"] = "3";
	$insert_data["custID"] = "2";
	$insert_data["editAV"] = "FALSE";
	$insert_data["maxAlias"] = "20";
	$insert_data["maxMail"] = "22";
	$insert_data["maxQuota"] = "300";
	$insert_data["postfixTransport"] = "maildrop:";

	// LDAP Insert DN		
	$addDN = "vd=plugged.in,o=hosting,dc=web-sistem,dc=com";
	$ldap->addRecord($connection,$addDN,$insert_data);

	// Prepare data to modify

	// Please change the record entry as required by your company directory structure

	$modify_data["adminID"] = "3213";
	$modify_data["custID"] = "2441";

	// LDAP Modify DN		
	$modifyDN = "vd=plugged.in,o=hosting,dc=web-sistem,dc=com";
	$ldap->modifyRecord($connection,$modifyDN,$modify_data);

	// Delete LDAP record	(third parameter is "Recursive")
	$deleteDN = "vd=plugged.in,o=hosting,dc=web-sistem,dc=com";
	$ldap->deleteRecord($connection,$deleteDN,true);

	//Close LDAP Connection
	$ldap->close($connection);
?>

That’s all for now.

If you have questions or advices about this class please leave a message in comments section.

The post Simple LDAP Class for PHP appeared first on VeriTeknik.

]]> https://www.veriteknik.net.tr/en/simple-ldap-class-for-php/feed/ 0 652